Description of 1.2 meter shrink heat tunnel Semi-auto sleeve bottle labeling machine
The steam shrinking furnace has greatly improved heat shrinkage efficiency, and is used for round bottles, split bottles, flat bottles and other bottle shapes of different specifications. It is easy to adjust and maintain, and the shrinkage is flat. The steam ejection method is designed in the form of separate steam bubbles. The pipeline is smooth and does not occupy space. Each side of the ejection outlet is divided into 3 sections. The height, front and back of each section and the air output can be adjusted separately to achieve the best The realm of perfect shrinkage effect. The low-pressure sub-steam bubble adopts seamless steel pipe design, each connecting pipe uses stainless steel hose quick coupling, which is easy to disassemble and install. The whole machine shell uses a stainless steel drain pan to concentrate the condensed water, which can be taken over and discharged. The working environment is not affected. The box is attached There are two windows at the front and the back, and the whole machine adopts a waterproof design and is made of stainless steel.
Advantages for our 1.2m steam heat tunnel for bottle sleeve shrinking:
1. Take the lead in adopting steam shrink technology
2. High heat shrinkage efficiency, simple adjustment for different and irregular round bottles, square bottles, flat bottles and other bottle shapes
3. The whole machine has three layers of heat insulation to reduce heat loss. It adopts waterproof design and is made of stainless steel 304
4. Equipped with thermometer and pressure gauge, steam pressure and shrinkage temperature are clear at a glance, easy to start operation
5. The steam inlet valve is equipped with a dial to save the startup time of each shift operation
6. Each nozzle on both sides of the whole machine can adjust its up and down/inside and outside position and spray direction
7. The front and rear ends of the whole machine are equipped with inlet and outlet guards to reduce steam leakage and heat preservation
8. A drain pan is installed in the lower part of the whole fuselage to collect the condensed water and discharge it in a centralized manner to prevent the problem of dampness in the site
Equipment list of 1.2m steam heat tunnel for bottle sleeve shrinking:
| Items | Name of machine | Model | Size(mm) | Qty. |
| 1.1 | Sleeve table+ sleeve shrink tunnel | SB-1000 | 1200*700*2000 | 1set |
| 1.2 | Steam generator | LDR-12-0.7Z | 760*570*1030 | 1set |
| 1.3 | Conveyor | 4 meter length with 1 motor | 1set |
Product Tags:
|
|
1.2 Meter Shrink Heat Tunnel Semi-Auto Sleeve Bottle Labeling Machine Images
|
